Ohms Chart

just found that recently on the net, and thought i d share,

 

no didnt

 

In general its saying you get the best vapor from 4-8Watts, I dont agree and would not like to vape at 4 Watts. I prefer 9-10 Watts and am quite happy on an RDA at 40 Watts.

 

I just got my Provari as you did Oil, so I was searching for the same thing.

I vape my iTaste 134 on 10.5 Watt with a dual coil 2 ohm so they say on the internet that it is the same as 5.2 volts, half of the Watt.

What does it mean if you have a dual coil reading 2 ohms, should you look at 2 ohm or 4 ohm with this chart? Because 5.2 volts is too high on the chart for a 2 ohms. I tried 4 volts but it looks way too low.

 

Look at the 2 ohm row and move along until you get to 10.5 watts, or as neer as you can, then set your VV to the voltage above it. Dont worry about the colours or comments that its too hot, unless your using thinner wire than 30g.

If you know your power usage use this to find the voltage. Square root of R*W. In your case Square root of 2*10.5 =4.58V

 

same same, got my provari today, and i actually totally love vaping with it, i have to admit i didnt expect that one, but since everybody seems to be so fond of that device i felt compelled that i had to try it at least once