1. Welcome to Thailand Vapers, an English language forum for members in Thailand and the rest of Asia to talk about vaping.
    Commonly referred to as e-cigarettes, vaping is really about the use of personal vaporizers (mods) and atomizers (tanks, clearos, RBAs, RDAs, RTAs) filled with e-liquid.
    Are you looking to get started or an old hand at vaping? Everyone is welcome here so sign up today and talk vaping with us!

VOOPOO Rimfire 26mm RTA

Discussion in 'VooPoo' started by voopootech, Nov 29, 2018.

  1. voopootech

    voopootech Thread Starter New Member

    Joined:
    Sep 13, 2018
    Messages:
    53
    Likes Received:
    1
    [​IMG]

    The Rimfire RTA (chuckle) is marketed as a user friendly tank and is apparently leak proof and easy to build.

    The top of the tank is removed for filling and sort of locks into place rather than a full screw on tank.

    The chamber components have a left hand thread to help avoid accidental unscrewing.

    The deck part of the tank will accommodate single or dual coil builds.

    [​IMG]




    The airflow comes in through the top of the tank and is channelled down to the underside of the coils. This should help with leak prevention.

    There is a great kit to come with this RTA too including coils and cotton and spare screws.

    An 810 resin drip tip is installed as standard and at the base of the tank the 510 connector pin is gold plated to improve conductivity.

    Here is a video from the Voopoo website to give you a closer look at the Rimfire RTA and how to build it.



    There are 4 colours available – Gold, Red, Black and Silver.

    [​IMG]

    Product Features:

    • 26mm Base Diameter
      • 30mm Maximum Diameter
    • 5ml Tank Capacity
      • High Capacity Tank Reservoir
      • Twist-On Top Cap
      • Two Large Fill Ports
      • Reverse Threaded Tank Chamber
    • Stainless Steel Postless Build Deck
      • Dual Coil Design
        • Four Terminal
          • Side Mounted Hex Screws
          • 2mm by 3mm Each Terminal
        • Eight 1mm Air Holes on Build Deck
        • PEEK Insulation
      • Dual Wicking Ports
        • 9mm by 3.5mm Adjustable Wicking Ports
    • Dual Adjustable Top Airslots
      • 12mm by 1.75mm Each Airslot
      • Fully Closeable
    • 9mm Bore 810 Resin Drip Tip
    • 304 Stainless Steel and Glass Construction
    • Gold Plated 510 Contact
     

Share This Page