No Leak atomizer head, Thailand

Hi Guys firstly an apology if i posted in the wrong section and again apology if same topic was done before.

In a nutshell, i am a total newbie to vaping, completely clueless.

Decided to quit smoking and change to Ecig, BEST DECISION EVER

Have not had a cigarette for over a week and going strong, HOWEVER.

Being a clueless newbie, bought all my stuff at the markets in Pattaya, including an atomizer head, please do not ask what kind as i do not have a clue, just unscrew the top, fill in the juice and vape away.

HOWEVER, this head always leaks and more than often has a burned plastic smell..

Cut the story short, seller who sold it, could not care less, found another shop with really nice guys, but they can not fix the problem , did some light reading and leaking is common problem.

So my question, anyone can recommend a good atomizer head which does not leak and can be purchased in Thailand or somewhere nearby with fast shipping?

A lot of Chinese based sites do not ship to Thailand, have ordered one from Ebay, regular economy mail (may be lucky to get through)but a least 3 weeks wait.

Any help of advice much appreciated.

Sorry for the long rant

 

Thanks Siam Diesel

Its a separate battery and a screw on atomizer.

Atomozer is ijusts brand, the battery is wismac reulleaux rx2/3

 

@Kuff

Its a good mod is the Reauleaux..

Regarding the Atomiser..

I would recommend the UWell Crown... nice flavour,good solid build..

Also, has a RBA section, which means in future ,you could make your own coils... makes it easier
than trying to find the atomiser heads on the internet...

 

Did you close the air flow hole before refilling ?

 

No option to close, ie ijusts head i have does not have air flow controls

 

Have you any spare o'rings in the box?

Could be a faulty o ring..

When you attach, the Ijust to the Wismec,

Whats the coil resistance? ie 0.2,0.5. 0.6 etc??

and how much power, do you use?? 10w,15w, 20w etc

 

There should be a rubber ring to control the air flow.

 

nope, mine does not have it. i think i was sold a fake one

 

just seen this on youtube..

Hello, I have the same kit, and i figure out why it happens.
1. The coil has silicone sealing, so care when u change the coil, it happens that silicone sealing just drop from the heater/coil.
2. When insert the juice/oil, care to do not get some drops in the hole, because, only one drop, goes directly down throw coil and throws down into intake space. Mine expirience with this kit is good, condensation is normal. think they lied us,

Also comments state, leaking has stopped, when changed to a high VG juice....

 

I never see any fake Ijust tank so far.

Try to shut the air flow hole with two fingers while refilling and release after the cap is tighten. Or, use a rubber band.

 

this may help...

 

Initially i did not put drops on the coils which caused burning plastic/rubber smell and taste.

**Updated**

i prefer just to buy a new one and tank leaks NOT during refills, but during use