1. Welcome to Thailand Vapers, an English language forum for members in Thailand and the rest of Asia to talk about vaping.
    Commonly referred to as e-cigarettes, vaping is really about the use of personal vaporizers (mods) and atomizers (tanks, clearos, RBAs, RDAs, RTAs) filled with e-liquid.
    Are you looking to get started or an old hand at vaping? Everyone is welcome here so sign up today and talk vaping with us!

Marquis RDA Clone

Discussion in 'Big By-Pass's Atomizers, Cartomizers and Tanks' started by Big by-pass, Jan 30, 2015.

  1. Big by-pass
    No Mood

    Big by-pass Thread Starter Well-Known Member

    Joined:
    Mar 6, 2014
    Messages:
    804
    Likes Received:
    485
    The rather simple looking Marquis RDA is a fantastic rebuildable for all the flavor chasers out there! If you love theVeritas as much as I do, then you just might like this Marquis RDA even more as it has a very similar design, but what I love is that this has a dedicated air hole for each coil.

    What sets the Marquis RDA miles ahead of others like it is not just the design, but also the build tools that come with it making it super easy to whip up perfect coils every time. This thing is super easy to build on, looks great with no overbearing logos, and produces some of the best flavor you’ll get in an RDA to date!

    Details:

    • 510 threading w/ fixed copper center screw
    • 22mm outside diameter.
    • 32.5mm overall height w/o drip tip
    • Dual ground screws easy dual coil setup
    • Dual coil/single coil capable
    • Innovative crown style center post with wire capture tabs
    • Vertical, horizontal or chimney coils
    • Cotton, silica, SS mesh, etc. wicking
    • Custom coiling rods in 2.5mm, 3.0mm, 3.5mm, 4.0mm diameters
    • Blind holes in liquid well for perfect coil alignment
    • 6mm deep liquid well (approx.)
    • Double O-rings for a firm top cap seal
    • Adjustable airflow ( single and dual coil mode)
    • Removable lid (16mm) with heat insulator
    • Custom wide bore drip tip (8.7mm bore)
    • 2x custom lid adaptors for 510 style drip tips
    • Custom CNC engraved
    Price 650THB.
    EMS 50THB.


    MARQUIS.jpg

    MARQUIS.jpg1.jpg

    MARQUIS.jpg2.jpg
     
    haybilly likes this.
  2. Scratchy
    Lurking

    Scratchy Well-Known Member

    Joined:
    Jul 8, 2014
    Messages:
    2,501
    Likes Received:
    2,873
    Ha-ha!

    Put a little bit wider diameter and thinner one on there (only spare one I have here that looked like it had a chance at working) and it has helped.

    One other note about this atty is that there are three top cap options and I am using the taller one without the drip-tip built in and noticed it can shift slightly (Just the same amount as seen at the 15:30 mark here: ) but has continued to hold a seal...any looser though and it could be prone to pop off. I'll be trying the shorter one next. Expect it will warm up the vape some.
     
  3. fillmcavity
    Angelic

    fillmcavity Serial Vapist

    Joined:
    Jul 25, 2014
    Messages:
    341
    Likes Received:
    517
    Thanks for the feedback guys. I might just pay Big a visit next week some time.
     
  4. jon
    Mellow

    jon Well-Known Member

    Joined:
    Jun 28, 2014
    Messages:
    980
    Likes Received:
    1,142
    Location:
    Nong Luong
    Gotten more and more interested in flavour so I had to order this. Sometimes I cringe a little when I think about the amount of money I have spent with Big :)
     
    Dieter. likes this.
  5. jon
    Mellow

    jon Well-Known Member

    Joined:
    Jun 28, 2014
    Messages:
    980
    Likes Received:
    1,142
    Location:
    Nong Luong
    Put in a new build today, a 26g / 2.5mm / 0.5 dual coil and it is a very nice atty. Good flavour and decent amount of vape too. And very quick to build.
    You really sells some nice things in here Big :)
     
    Scratchy and Dieter. like this.
  6. fillmcavity
    Angelic

    fillmcavity Serial Vapist

    Joined:
    Jul 25, 2014
    Messages:
    341
    Likes Received:
    517
    I can confirm that. I bought one yesterday and built a dual 3 mm coil with 26g for 0.5 ohm. Good hit, good flavor too. And easy to build. Thanks Mr. Big.
     
    Big by-pass and Scratchy like this.
  7. Scratchy
    Lurking

    Scratchy Well-Known Member

    Joined:
    Jul 8, 2014
    Messages:
    2,501
    Likes Received:
    2,873
    Glad to see others are really happy with it too!

    @jon: I cringe sometimes too but man, there are so many good RDAs out nowadays and many of them have their own unique attributes that it's hard to resist. Until recently I had 2 copies of the Plumeveil clone which I really love but let one go because some of the new additions in my collection are right up there with it in flavor or have some advantages over it in other areas. I also let go of my Origen clone to make room for the newer ones and that was not an easy thing to do because it's no slouch itself!
     
    Last edited: Feb 4, 2015
    jon likes this.
  8. fillmcavity
    Angelic

    fillmcavity Serial Vapist

    Joined:
    Jul 25, 2014
    Messages:
    341
    Likes Received:
    517
    I replaced the two 26g coils with dual 28g coils of the same resistance with better results. It fires up real quick now and IT WAS SO EASY!! I'm liking this RDA more and more.
     
    Scratchy and Tibo like this.
  9. Venomx
    Lurking

    Venomx Well-Known Member

    Joined:
    Jul 4, 2014
    Messages:
    286
    Likes Received:
    296
    Location:
    Bangkok
    I didn't know i bought the last one today.
    She is taking a well deserved vodka bath and i cant wait to see what she can do tomorrow.
     
  10. Tibo
    Relaxed

    Tibo French Hedonist

    Joined:
    Jun 18, 2014
    Messages:
    3,593
    Likes Received:
    4,228
    Location:
    Bangkok
    From Big ?



    Sent from my iPad using Tapatalk
     
  11. Venomx
    Lurking

    Venomx Well-Known Member

    Joined:
    Jul 4, 2014
    Messages:
    286
    Likes Received:
    296
    Location:
    Bangkok
     

Share This Page