Issue with Cleromizer

Hi everyone,

The only issue i had so far is my cleromizer tank, (stardust and similar). I can only use them on my normal Ego battery. If i try to use them on my V-Max i get a very burning test even with very low voltage 3.5V.

They all have a resistance 2.4 Ohms. They should work great on the V-max. I don't have idea why they don't work well...

Do you have any ideas?

Thanks.
William

 

the problem with vmax is tht it produces a stable output of 6 volts only, so incase u set it at say for example 3 volts, it will fire 6 volts on the first pulse n then second pulse wont fire at all n then fire 6 volts again on the third pulse n so on n so forth, this is just approx. no. its called pulse width modulation, i dnt have a vmax, but wat experts are saying is tht a 3 volts setting is equivalent to a 4.2 volts setting in a provari!! so with a 2.4 ohms resistance i d say u shld go with the lowest setting of 3 volts, maybe tht will get rid of the burnt taste..

 

Hi gdawg,

Oh, that's weird.. I've seen many people on youtube using Cartomizer with tank on Vmax and other variable Volts mods without any problem.. I don't know why i can't... I've also got the Vision Eternity atomizer and i've tried on my E-go.. OMG it's horrible.. The smoke it's cold and the taste it's like a burned tire.. Very bad experience.. I don't know if the coils have enought juice but i've dropped in 30 drops as per instruction..
Do you know any good Cleromizer to use with a VV mods??
Cheers.

 

the kanger t3 and the ce5 clearomizer, they r both nice, i ve used them earlier, nice but u cant use them with the vmax, they have ego threading.. so with the ego to 510 adapter its all good.
for the vision eternity rba the smoke will be cold bcos of the distance between the coil and the mouth piece.
the burnt taste can happen in 3 cases. 1. liquid has run out, 2. the wicks r getting tied down somewhere so the juice is not wicking properly, 3. there too much power.
check for these signs. try n remake the coil with a little higher resistance, n make sure tht wicks are just sitting nicely n r not really strangled ne where.
hope this helps, theres not much i know abt these things bcos i used them for less than a week n decided they werent for me.
cheers

 

Hi mate,

Actually i have a few of Ce5 cleromizer and you can use it on VMax.. They can fit as it has both connection.. But the problem is the burning taste with those cleromizer on the Vmax. they work great on the normal E-go battery but on a VV mod they really taste like a burned tire..
Cheers.

 

wat voltage did u try on the vmax?

 

I've tried even 3.2 V..It still taste nasty.

 

try 3 also, some experts say that a 3 volts displayed is actually 3.8volts in effect.

 

Ok, Cool. I will try it. By the way i put on sale my VMax V2 as i have too many mods. ;-)