Innokin iTaste VV V3.0 Problem

One of my VV V3s suddenly stopped giving me control over watts. Now both sides (- and +) give me volts and let me control volts. I assume there is nothing I can do about it, but if anyone knows something I can try, please let me know. More important, I just want to confirm that 4.1 volts is roughly the same as 8 watts.

 

It is if your coil is 2.1 ohms

- - - Updated - - -

This chart will be a good reference for you . . . .

 

Yup...2.1 ohms

Thanks!

 

Sorry to hear about your vv v3 problem btw.
Try removing your atty and turn the mod off and on again.
I assume you know that pressing the + button first then the power button and keeping them both pressed down will change the mod to watts mode.
Remember to keep both buttons pressed until it changes.
I've had mine for over 8 months now and it's still working perfectly.
Good luck.

 

:thank you thank you

Bless you sir! I had completely forgotten about that. Problem solved!

 

I have noticed because I just looked and a hell lot of mods from vv/vw that the vision spinner is stronger in mA than the I taste vv ? Should it not be better to get a spinner then?

 

There are a number of reasons why I chose the VV V3 over the Spinner. The Spinner is only variable volt and limited in that. I much prefer variable watt, as you don't need to bother with calculating the setting. Just find your sweet spot and vape any tank system at any ohm. When charging the spinner it can not be used, but the VV V3 can. And any micro USB power source can be used to charge it, like a Samsung mobile phone charger, which can be purchased easily. The Spinner does not come with a charger, but works with ego battery chargers, so if you have one fine, but if you don't then you must purchase the charger separately. You can not purchase the charger at a mobile phone shop, but you can get one at a phone shop that works with the VV V3. The Spinner is longer, which might be an issue for vaping out and about. In my opinion, the only advantage with the Spinner is if you want a portable battery that will probably last all day and you do not want to carry two batteries and you will not be in a place that you can charge it while you use it and you are happy with the voltage settings it offers.

 

All good points & that's why I like mine too. Oh yeah, and it's square so it won't roll off a table.

 

Good argument, and you can measure the resistant of the coil, when in doubt.

 

Now I really go nothing to say. Lost me words. But yes it would not be the vest for me as I am not always around sockets and car rides are so short I would not cat it full. Thank you byoung

 

Think about how you will actually carry your E-cig around all day, and maybe a bottle of juice. The Spinner is not going to fit nicely in any pocket. If you see that the E-cig will need to go inside a carry bag, and you want something that will last you all day, then take a look at the itaste MVP. 1400 baht and 2600 mah.

iTaste MVP V2.0 starter kit ** out of stock

 

Thank you byoung. Already looked at that one. Would have to see when I have time and ££ to get it. Would be more satisfying than the spinner I have for sure. Does Micky have a shop?

 

I think he is talking about opening one, but for now just order on-line. Never a problem!