Evod coil in the Protank

I replaced the coil in my Protank with a EVOD coil and put it on the beauty ring wit no air hole , much better air draw, its like I have a new tank

 

i tried the x9 coils in the protank. I dont know if they are the same coils as the evod, they are a little bit shorter than the original protank coils. Personally i don't like it cause its a tighter draw but others that don't like the protank because of too much airflow would like it.

 

yes evod,or mt3 coil work in protank,just change the part go inside protank,the long one

 

I think you mean T3, MT3 you can not separate from the bottom so that will for sure not fit in a protank hehe

BTW, got my third MT3, that is leaking as well, so 2 I have are leaking, and 1 have bad flavour and taste plastic, EVOD is so much better than the MT3.

 

no mt3 is the same to t3,just add cover color,anything,base included is the same.

 

Then you are talking about a T3 upgrade, the MT3 is a solid base, you cant separte the coil from the base

- - - Updated - - -

Replacement base/coil bundle for the T3/MT3, which allows you to upgarde your T3/MT3 to the T3S/MT3S. If you have a T3/MT3, and you want to upgrade, then you will need to purchase one of the T3S/MT3S base/coil bundle.

This base/coil bundle can not be used for the Kanger Evod or Protank

http://www.mtbakervapor.com/cartomizers/kanger-t3s-mt3s-base-coil-bundle/

- - - Updated - - -

I have it here in my hand, its solid, you can not unscrew it

 

i talk about this:
and i have 5 mt3 and 2 t3 is the same things just the cover
Kanger MT3 Clearomizer
Kanger T3s BCC Clearomizer
is the same system coil bottom and coil is the same also in protank and evod
just change the size of spout length
if you change the spout you can put this in anycoil kanger and work,i do manytime

oh i see now,you talk about the old one t3

 

Hehe No, the Mt3, I have 3 of them, and the bottom coil is solid, you can not screw the coil out, you have to replace the hole thing or use a T3 upgrade, the Bottom coil that comes with the MT3 can not be used in a EVOD or Protank, ask Micky he sold them to me LOL I take a picture for you tomorrow

 

just i not understand,i do everyday with my mt3,evod and protank,i like to clean and change coil
dont know why you cannot take off the coil,i can
anyway its ok,dont worry